Hello:
While preping my TR4 for the next race, I noticed that the threads on the carb
dashpot are virtually worn smooth. Obviously, the damper barely stays in
place. Does anyone have a spare dashpot with threads they could part with?
One other item I found is that the tips of the dampers where the "C" washer
attaches, were almost completely worn away so that the washers fell off when I
lifted the dampers out of the dashpots. New dampers are on order.
Thanks,
Gary
1962 TR4
1969 TR6
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|