> I need 24 high-shear strength studs, 5/16"-24 2" long.
MMC has threaded rod in 4140 (125,000 psi tensile). You could cut your own
studs out of that.
http://www.mcmaster.com/nav/enter.asp?pagenum=3087
99086A190
Or if that's not strong enough, call up ARP and see if they have something.
Randall
(Tedious but unavoidable disclaimer follows)
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|