fot
[Top] [All Lists]

Re: [Fot] TR4 head gasket fo ra milled head

To: toodamnfunky@comcast.net, fot@autox.team.net
Subject: Re: [Fot] TR4 head gasket fo ra milled head
From: WEmery7451@aol.com
Date: Sat, 18 Aug 2007 10:00:08 EDT
In a message dated 8/17/07 7:07:27 PM Pacific Daylight Time,
toodamnfunky@comcast.net writes:

<< any idea's on what will happen if I get a bit of the gasket hanging over ? >
>

Kass's book: Possible detonation or pre-ignition, though I have done it
before when in a hurry.  I have occasionally installed a steel head gasket with
 no
ground off areas to match the combustion chamber.  Never noticed any
difference, but not a good idea.
**************************************
 Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>