Yup, Ken gillanders has nice flat top wisecos and sleeves from LA Sleeve. I'm
going to use the 92mm in my street TR3.
-----Original Message-----
From: fot-bounces+billb=bnj.com@autox.team.net on behalf of Mark J. Bradakis
Sent: Tue 8/28/2007 9:00 PM
To: FOT@autox.team.net
Subject: [Fot] TR3 bore sizes?
So this local club member brings in his TR6 for some work (stuck
Grose Jet in rear carb) and we start talking about his TR3 project.
Can 89 mm piston sets be had that will make a reliable, streetable
motor?
mjb.
billb@bnj.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|