Sorry, I understand that the 6 cylinder engine is a "different kettle of
fish" and is much harder to keep the flywheel on at high rpm.
Greg Solow
----- Original Message -----
From: "Bill Babcock" <BillB@bnj.com>
To: "Tony Drews" <tony@tonydrews.com>; "Jim Cun" <jimcun2001@yahoo.com.au>;
"Friends of Triumph" <fot@autox.team.net>
Sent: Monday, November 19, 2007 12:44 PM
Subject: Re: [Fot] Alloy v steel
> I'm not a fan of alloy flywheels, I've had two come adrift despite a lot
> of
> modification and prep. The steel flywheels are almost as light and seem
> bulletproof. The cast ones can't be lightened enough to be worthwhile.
> Fine
> for the street.
>
>
> -----Original Message-----
> From: fot-bounces+billb=bnj.com@autox.team.net on behalf of Tony Drews
> Sent: Sun 11/18/2007 1:14 PM
> To: Jim Cun; Friends of Triumph
> Subject: Re: [Fot] Alloy v steel
>
> Alloy flywheels seem harder to keep attached to the crankshaft. With
> proper care, they work well, though. They seem to be more
> troublesome in the 6 cylinder motors, anecdotally.
>
> - Tony
>
> At 03:01 PM 11/18/2007, Jim Cun wrote:
>>Hi Guys,
>> Just wanted to ask your thoughts on an alloy flywheel vs
>>steel for a TR race car?
>>
>>Regards Jim
>>
>>
>> Make the switch to the world's
>>best email. Get the new Yahoo!7 Mail now.
>>http://au.yahoo.com/worldsbestmail/viagra/index.html
>>_______________________________________________
>>http://www.team.net/donate.html
>>
>>Fot mailing list
>>Fot@autox.team.net
>>http://autox.team.net/mailman/listinfo/fot
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|