fot
[Top] [All Lists]

Re: [Fot] Tubing for Triumph

To: Gt6steve@aol.com, FOT@autox.team.net
Subject: Re: [Fot] Tubing for Triumph
From: chasgee@aol.com
Date: Tue, 11 Dec 2007 19:31:09 -0500
Steve,



By a cheap V-8 header set from someone like Speedway or Summit.? A kit with all 
the bent tubes in the diameter you need.? This way you can cut to get the bends 
you need and weld it all together.



Chuck


-----Original Message-----
From: Gt6steve@aol.com
To: FOT@autox.team.net
Sent: Tue, 11 Dec 2007 12:58 pm
Subject: [Fot] Tubing for Triumph




Hey tube fetishists, I need some help on a couple things.  
 
Firstly being hydraulic style tubing.  Have you any thoughts on replacing the 
braided steel lines running to my drysump tank with hard steel or aluminum 
lines.  I'm thinking the area in the cockpit can be cleaned up with hard lines. 
 

I'm looking at two runs of 3/4 (-12) from the firewall in front of the driver 
to the right rear of the passenger seat well.
 
Second search is for header tubing.  Where do we buy the thinwall tube for 
making headers?  Just mils steel, I'll leave the Inconel to the experts.
 
Thanx in advance, Steve Smith



**************************************See AOL's top rated recipes 
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot


________________________________________________________________________
More new features than ever.  Check out the new AOL Mail ! - 
http://webmail.aol.com
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>