fot
[Top] [All Lists]

Re: [Fot] Followup to TR7 wheel stud question

To: "'Robert Lang'" <lang@isis.mit.edu>, "'Bill Babcock'"
Subject: Re: [Fot] Followup to TR7 wheel stud question
From: "Mark York" <m-syork@comcast.net>
Date: Wed, 12 Mar 2008 07:38:38 -0700
I bought some lug nuts from Summit for the Panasports on my TR3 (with the
alloy front hub conversion). The part number was GOR-90087 and the cost was
$4.39 for a pack of 4, these are open end and are available in different
sizes.
Mark

-----Original Message-----
From: fot-bounces+m-syork=comcast.net@autox.team.net
[mailto:fot-bounces+m-syork=comcast.net@autox.team.net] On Behalf Of Robert
Lang
Sent: Wednesday, March 12, 2008 6:56 AM
To: Bill Babcock
Cc: fot@autox.team.net
Subject: Re: [Fot] Followup to TR7 wheel stud question

On Tue, 11 Mar 2008, Bill Babcock wrote:

> Cut off the end of the nuts with a angle grinder--it's just a tin cap.

Interestingly, some are not just caps!  I have a set of 7/16-20 lugnuts 
(barrel type) for my American Racing 4-spokes that were closed-ended... we 
tried "popping the cap off" to no avail, so we had to chuck them on the 
lathe and turn them down to expose the threads (so that we could use them 
on the 3" studs we'd installed).

So if you can't knock the cap off easily, next stop is the machine shop.

regards,
rml
---------------------------------------------------------------------------
Bob Lang              NER/SCCA                 |  This space for rent
Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
---------------------------------------------------------------------------
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

You are subscribed as m-syork@comcast.net
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot


<Prev in Thread] Current Thread [Next in Thread>