I've had good luck with the Eastwood caliper paint - bead blast to bare
metal first. It's holding up on my front claipers after a few years and the
usual drips from bleeding
----- Original Message -----
From: "David Kettler" <dkettler@powercom.net>
To: "Friends of Triumph" <fot@autox.team.net>
Sent: Thursday, March 27, 2008 9:37 PM
Subject: [Fot] [FOT] paint or coating
> Dear FOT:
>
> I'm looking for a paint or coating that is resistant to brake fluid. I
> use
> Castrol GTLMA brake fluid. I know that silicone fluid might be a
> solution,
> but prefer to stay with the Castrol conventional fluid.
>
> Does anyone have a recommendation on a paint, powder coat or other
> solution?
>
> Thanks.
>
> Dave Kettler
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as s.janzen@comcast.net
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|