fot
[Top] [All Lists]

Re: [Fot] Creative camber adjustment

To: gtlund@cyberspeedway.net, fot@autox.team.net
Subject: Re: [Fot] Creative camber adjustment
From: WEmery7451@aol.com
Date: Sat, 16 Aug 2008 12:03:20 EDT
In a message dated 8/15/08 6:10:55 PM Pacific Daylight Time,
gtlund@cyberspeedway.net writes:

<< Of course no mods were allowed. The solution was to pick up   the front end 
with an overhead hoist and drop the car from ever   increasing heights until en
ough negative camber was achieved >>

I never did any real scientific moves with my negative camber.  In my earlier
years, I used Lee Mueller springs with the spacers taken out and cut upper
control arms on my TR-3.  After accumulating what was left of Donna Mae Mims
TR-3, I took apart the front suspension and found short springs with the spacer
s
still installed.  I installed them on my car with uncut upper control arms,
and got approximately the right negative camber.

Someone told me that this was one of the first cars set up by Group 44, when
they were working in a one stall lean-to in Falls Church, VA.  I wonder if
they did some trick maneuver, or did just lowering the car do the job.  If anyo
ne
has any contacts with ex-Group 44 members, maybe he can ask them.

Donna Mae also told me that she upset the car once, and the Group 44 roll bar
collapsed on her.  I saw her this summer working grid at the Pittsburgh
Vintage Grand Prix.
**************
Looking for a car that's sporty, fun and fits in
your budget? Read reviews on AOL Autos.

(http://autos.aol.com/cars-Volkswagen-Jetta-2009/expert-review?ncid=aolaut00030
000000007 )
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>