fot
[Top] [All Lists]

Re: [Fot] LUK clutches

To: "Henry Frye" <henry@henryfrye.com>, "Lorne Fritz" <lfritz82@hotmail.com>,
Subject: Re: [Fot] LUK clutches
From: "Charly Mitchel" <charly@mitchelplumbing.com>
Date: Wed, 27 Aug 2008 07:23:13 -0700
I know of at least 3 failures in the NW of these clutches, B-B and even a 
supposedly racing clutch from a Saab application.
It seems the only way around this problem is the adapting of a Tilton 
clutch.
Charly Mitchel
TR6 #44
----- Original Message ----- 
From: "Henry Frye" <henry@henryfrye.com>
To: "Lorne Fritz" <lfritz82@hotmail.com>; <fot@autox.team.net>
Sent: Wednesday, August 27, 2008 6:34 AM
Subject: [Fot] LUK clutches


> There have been at least 3 LuK clutch pressure plate failures in racers
> that I can document this year. All were about 5 years of racing use.
> Look at the 3 metal straps that hold the part that engages the friction
> disk to the outer shell. Mine broke at the rivet and would not
> disengage. Leo's developed a nasty vibration. Tony's started slipping.
>
> Also George's Borg and Beck failed, throwing a little chunk that could
> not escape the bellhousing until it made a hole big enough to escape.
> Scratch that gearbox case...
>
> There have been way too many gearbox pulls in the paddock this season
> because of clutches... Also having a new clutch kit ready to go in the
> race spares is a very good idea.
>
>
>> -----Original Message-----
>> From: Lorne Fritz
>> Subject: [Fot] TR6 clutch
>>
>> Has anyone had any throuble with a Luk clutch kit for a
>> TR4a/6.  In the last 4 I installed I had 2 break throw out
>> forks and two wouldn't release completely after a short
>> period of use.
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> 


_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>