a message dated 10/25/2008 4:08:45 P.M. Eastern Daylight Time,
brad.kahler@141.com writes:
Is the slippage that is being described, between the shoe and the
>> floor or
>> with the pedals? I would think that the Pedals are the main concern.
>>
>> If that is the case, putting some sort of abrasive surface on the pedals
>> might be the solution.
The best way to solve this in my experience is to remove the pedals and
drill 1/4" holes through from the backside. Works best with a drill press. You
can get about 10-15 holes in most British pedals.
When you turn the pedal right-side up, the holes will have sharp burrs that
give great grip. Resist the temptation to smooth them off.
This will last for years and totally resists oil and other slippery
substances.
Jack Woehrle
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100000075x1211625659x1200715650/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=82&bcd=emailf
ooter)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|