fot
[Top] [All Lists]

Re: [Fot] TR3/4 engine builders

To: "tr3a58@verizon.net" <tr3a58@verizon.net>, "fot@autox.team.net"
Subject: Re: [Fot] TR3/4 engine builders
From: "Kramer, Robert" <RKramer@rdoequipment.com>
Date: Fri, 30 Jan 2009 15:47:14 -0600
I buy extras from Moss and hammer them in there pretty tight with sealant.

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On Behalf
Of tr3a58@verizon.net
Sent: Friday, January 30, 2009 3:43 PM
To: fot@autox.team.net
Subject: [Fot] TR3/4 engine builders

   For  the  past  several  years  I have been using Payen gaskets for my
   engines.  I  received a gasket set this week and the felts for packing
   the  rear main cap is way too small. Any body else seen this and where
   can one get proper sized felts?

   Dean T.

   Felt less in Virginia........
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>