No the copper will not compress. It can deform more easily to
accommodate a burr or other irregularity, but it won't compress at all.
On Jun 24, 2009, at 7:23 PM, Stutzman wrote:
> Standard steel figure 8s are 15 thou thick.
> I got some copper ones from Dave at TRF that I would like to use but
> they are
> 19 thou.
> Are they thicker because they will crush?
> Without the figure 8s my liners are all depressed 11 thou so I don't
> have any
> measurement issues.
> Bruce
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|