Joe,
Sounds like a jaguar setup. That is the current setup allowed on the TR6
for SCCA and what Fletcher adapted to my car before I ran it. Good but a
bit heavy and now outdated.
Chip Collingwood
TR6
510
> [Original Message]
> From: <N197TR4@cs.com>
> To: <fot@autox.team.net>
> Date: 7/10/2009 12:05:18 PM
> Subject: [Fot] MYSTERY CALIPERS-HELP!
>
> List:
>
> I have a pair of calipers adapted to "race car since new" TR250. (I have
no
> personal history with this car)
>
> It is a THREE POT CALIPER bolted to the existing the caliper bracket.
>
> The caliper wraps itself around VENTILATED ROTORS with a five position
bolt
> circle modified to four position....same bolt circle diameter. (Jaguar?)
>
> ....anyone familiar with this?
>
> We are evaluating this set up for use on a Listers Vintage Racer (TR3)
>
> Joe Alexander
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|