fot
[Top] [All Lists]

Re: [Fot] Welded Diff & Chuck Gee

To: Dennis DeLap <yellow-green@sbcglobal.net>
Subject: Re: [Fot] Welded Diff & Chuck Gee
From: greg <gtlund@cyberspeedway.net>
Date: Sun, 13 Sep 2009 21:53:47 -0700
Dennis DeLap wrote:
> Amici -  I am going to try my hand at welding up a diff.
> 
> Any tips?
> Thanks
> Dennis DeLap
> 
> _______________________________________________
> 
> Support Team.Net http://www.team.net/donate.html
> 
> http://www.fot-racing.com
> 
> You are subscribed as gtlund@cyberspeedway.net
> 
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> 
> 
Amici,
    When you build a Lincoln locker (welded) it is a good idea to weld 
in sheet metal plates on both sides of the diff to contain welds and or 
spider gears if they crack. It will save the R&P and it cuts down on oil 
windage.
Greg

_______________________________________________

Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com


Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>