Mike
Do not use the old cooler, get a new one. If you loose a bearing, toss the
cooler and get another new one. I use Mocal and have had no problems.
Jim
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Mike Mehl
Sent: Saturday, October 31, 2009 7:06 PM
To: Triumph Friends of
Subject: [Fot] TR4 oil cooler advice needed
I got a lot of good ideas from the radiator questions from the forum. I
also need some thoughts on an oil cooler. I have a very old oil cooler on
the car that looks like I should not use. I am looking for advice on what
oil cooler to run along with the fitting/hose size. Also where should I
mount.
it?
Thanks.
Mike Mehl
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|