fot
[Top] [All Lists]

[Fot] TR3/4 Performance Camshafts - commercial message

To: FOT <fot@autox.team.net>
Subject: [Fot] TR3/4 Performance Camshafts - commercial message
From: Larry Young <cartravel@pobox.com>
Date: Mon, 16 Nov 2009 14:50:20 -0600
I am getting together an order of camshafts for the TR3/4.  I now have 4 
different grinds, including a high performance street cam and three 
different racing cams.  Complete specs along with those of other TR3/4 
cams are listed at my website (link below). If you think you might need 
one of these within the next few months, you should get in on this group 
order.  I have purchased a small batch of new chilled cast iron blanks, 
so I can grind the cam on a new blank or regrind a stock cam.  The 
advantage of using a new blank is that the diameter of front half will 
be about 1/8 inch larger, i.e. stiffer and stronger.

I believe I have finally found a grinder that does a good job at a 
reasonable price.  He has some of the best CNC equipment available.  CNC 
is nice because I can do a new grind without the up front cost to make a 
master.

I've also got my Cam Doctor up and running and have now profiled a 
number of TR3/4 racing cams.  I would like to profile some of the 
Kastner cams, because 0.050 numbers are not available for them.  I also 
plan to start profiling cams for the 6 cylinder motors, e.g. TR5 cam.  
If you would like to loan me some interesting cams for profiling, please 
let me know.  I will gladly share any information I get.

Larry Young
www.TildenTechnologies.com
_______________________________________________

Support Team.Net http://www.team.net/donate.html


http://www.fot-racing.com


Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.



<Prev in Thread] Current Thread [Next in Thread>
  • [Fot] TR3/4 Performance Camshafts - commercial message, Larry Young <=