fot
[Top] [All Lists]

Re: [Fot] Leaf Spring Eye Bushing

To: WILLIAM TOBIN <william.tobin3@verizon.net>
Subject: Re: [Fot] Leaf Spring Eye Bushing
From: Justin Wagner <jmwagner@greenheart.com>
Date: Sun, 10 Jan 2010 15:56:49 -0800
I use McMaster Carr a lot....   for my film industry work...   and I 
order much of the hardware that I sell with my gaskets from them.  They 
are EXTREMELY efficient in getting orders out and sending paperwork, 
etc.   It's become very difficult to get physical catalogs now, but 
their online catalog is very handy for racers' purposes.  For example, 
you could search for a washer or a bolt by size.... thickness... type... 
etc... and really narrow down what's available, etc.

Now I do have a bias here... Their west coast distribution center is in 
Santa Fe Springs, CA, which is just a 1/2 hour or so drive for me.... So 
I use their Will Call quite often!

If you do get a catalog, hang onto it as Charlton Heston said he would 
relative to his guns.  It's not like it used to be, where they would 
send a new one very year.

--Justin

 

WILLIAM TOBIN wrote:

>  Hi Gang, I agree with Joe that the M-C catalog is a great place to look
>for needed items. It's about 3500 pages, has quality items, and their
>shipping network is excellent. They have a lot of information  in the
>catalog, under the heading, "About...(subject)......."
>  I get a lot of obscure parts from them; a lot of common stuff, too.
>  Great place.
>  If you haven't used them yet, give them a try.
>  Bill----- Original Message -----
>  From: <n197tr4@cs.com>
>  To: <colordog.1@earthlink.net>; <fot@autox.team.net>
>  Sent: Sunday, January 10, 2010 1:30 PM
>  Subject: Re: [Fot] Leaf Spring Eye Bushing
>
>
>  > Look at what is available at McMaster-Carr in aluminum or bronze.
>  >
>  > OD  1.325   ID  .625   Lgth   2.25
>  >
>  >
>  >
>  >
>  >
>  >
>  > -----Original Message-----
>  > From: Steven Belfer <colordog.1@earthlink.net>
>  > To: Friends of Triumph <fot@autox.team.net>
>  > Sent: Sun, Jan 10, 2010 12:14 pm
>  > Subject: [Fot] Leaf Spring Eye Bushing
>  >
>  >
>  > Anybody out there know of a Polyurethane or Aluminum bushing that fits
>the
>  > front eye of the TR3 leaf spring? (not the rear shackle kit)
>  > I had to take an angle grinder to the spring eye pin to get it out and
>  > destroyed my dad's custom aluminum bushing in the process.
>  >
>  > I'm wondering if anybody out there may know of a part number for a
>modern car
>  > (or small truck) to save me a little leg-work.
>  >
>  > I found a place that can make me a custom bushing but I'd prefer to find
>  > something off the shelf if possible.
>  >
>  > Dimensions: L 2.25" W 1.325 Hole: .625"
>  >
>  > By the way the replacement Stock bushing from Moss does not fit onto
>their new
>  > pin.
>  >
>  > ~Steve
>  > Suggested annual donation $12.96
>  >
>  > You are subscribed as n197tr4@cs.com
>  >
>  > http://www.fot-racing.com
>  >
>  > Fot@autox.team.net
>  > http://autox.team.net/mailman/listinfo/fot
>  >
>  > Brought to you by Team.Net consulting - Unix software specialist.
>  > _______________________________________________
>  >
>  > Support Team.Net http://www.team.net/donate.html
>  >
>  > Suggested annual donation $12.96
>  >
>  > You are subscribed as william.tobin3@verizon.net
>  >
>  > http://www.fot-racing.com
>  >
>  >
>  > Fot@autox.team.net
>  > http://autox.team.net/mailman/listinfo/fot
>  >
>  > Brought to you by Team.Net consulting - Unix software specialist.
>_______________________________________________
>
>Support Team.Net http://www.team.net/donate.html
>
>Suggested annual donation $12.96
>
>You are subscribed as jmwagner@greenheart.com
>
>http://www.fot-racing.com
>
>
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation $12.96


http://www.fot-racing.com


Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.

<Prev in Thread] Current Thread [Next in Thread>