Tony, All bolts measure 3.425 w/o washer, washer measures .150. This set i
have appear to be stock. Mark
----- Original Message -----
From: "Tony Drews" <tony@tonydrews.com>
To: <fot@autox.team.net>
Sent: Tuesday, January 12, 2010 7:49 PM
Subject: [Fot] TR-3/4 main cap bolts / ARP
> Anyone have info on dimensions for TR-4 main cap bolts? The manual shows
> 1/2" UNC but not the length. I'm trying to figure out what ARP bolts you
> would buy to replace the stock bolts, and also one that's 1/2" longer to
> allow for "strapping" the center main. If I had the dimensions (length) I
> could try to cross reference the engines that ARP lists main cap bolts
> for.
>
> Thanks in advance,
> Tony Drews
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as mpendy@dishmail.net
>
> http://www.fot-racing.com
>
>
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|