George
I've been running one with a 20 psi switch. The switch is available from
NAPA or Pegasus. I'm running a simple light I picked up at a local parts
store, but I'd like to switch it out for an LED light.
I know the thing works. In the 70's I had one on my Formula Ford. I had an
oil pump gear retaining pin shear at 6000 rpm near the end of the main
straight. The light came on and I hit the kill switch. When I disassembled
the engine to check bearings and figure out what happened, everything was
fine except for the broken pin. Substituted part of a 16 penny nail and
made the race the next day.
The key is to locate the light directly in your line of vision.
Jim Norlin
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of George Harmuth
Sent: Monday, February 22, 2010 4:35 PM
To: fot@autox.team.net
Subject: [Fot] Oil Pressure warning lights?
I've been thinking about putting a low oil pressure warning light on the
dash of my Spitfire race car. I have full mechanical gauges but I'd like
something to bitch slap me if I miss a pressure drop. Does anyone have any
specific recommendations for sensors, lights and what PSI the system should
be set at? How about water temp, anyone running a warning light for that
too?
thanks
mike
Suggested annual donation $12.96
You are subscribed as norlinengineering@comcast.net
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|