fot
[Top] [All Lists]

Re: [Fot] TR3/4 filter head relief valve

To: "Greg & Alison Blake" <ablake2@austin.rr.com>, <fot@autox.team.net>
Subject: Re: [Fot] TR3/4 filter head relief valve
From: "Mark Pendergrass" <mpendy@dishmail.net>
Date: Tue, 4 May 2010 19:47:13 -0700
Copper ' crush ' washers have always worked for me. MPendy
----- Original Message ----- 
From: "Greg & Alison Blake" <ablake2@austin.rr.com>
To: <fot@autox.team.net>
Sent: Tuesday, May 04, 2010 4:38 PM
Subject: [Fot] TR3/4 filter head relief valve


>I am trying to solve the little seeps I have around the filter head.  Has
> anyone used an o-ring under a washer to seal the pressure relief valve
> adjusting screw lock nut?  I thought I would give this a try but the 
> o-rings
> available at the local autoparts store seems to be too thick and stand 
> proud
> of the chamfer that used to be sealed by a lead wire.
>
>
>
> What have you guys used?
>
>
>
> Thanks,
>
>
>
> Greg
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mpendy@dishmail.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>