Bobby,
What Scott said. I coat mine with Hylomar so they will release for reuse.
Mike
To: Bobby Whitehead <igofaster@att.net>
Cc: FoT Triumph <fot@autox.team.net>
Sent: Wed, September 8, 2010 1:27:10 PM
Subject: Re: [Fot] thick manifold gasket TR6/GT6
PRI has some great ones that I have been using for several years. You
can get several assembly/disassembly cycles out of them. They are
some sort of thick, grey, very dense material. He does not always have
them in stock, however.
On Sep 7, 2010, at 9:07 PM, Bobby Whitehead wrote:
Been chasing down vacuum leaks on the GT6 carburetors. First the back
one leak,
then the front, then the back.... argh..
The GT had a smaller gasket cut for the intake manifolds mating to the
header
flange. It's been back and forth. I cut a thinner gasket up and a
thicker gasket
up to try to chase down the leak...
I think if I can locate the thicker manifold gaskets and cut one up
for the
intake side, I might be able to kill the gremlin..
Who has the line of thicker manifold gaskets?
Joe? Ted?
Bobby Whitehead
GT6+
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/s.janzen@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|