I vent from the fuel pump blanking plate and the valve cover with -8 lines.
jim g
----- Original Message -----
From: "Mark Pendergrass" <mpendy@dishmail.net>
To: "friends of triumph" <fot@autox.team.net>
Sent: Wednesday, October 6, 2010 8:22:15 AM
Subject: [Fot] block venting
Family, earlier post made mention of venting the block. Seem to have alot of
pressure build-up even to the point of haveing to wrap a shop towel around the
rocker cover filler cap prior to getting on track. i have a finned aluminum
cover with a pretty small vent hose. Would it help to weld a larger bung on
cover to accept a bigger vent hose....this is driving me nuts!!! The usual
venting stuff we do has been done.........i think! B B Thanks in advance B
Mark
Pendy B TR4#65
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|