fot
[Top] [All Lists]

Re: [Fot] Brake caliper sealing rings

To: gkbyrne@optushome.com.au, tr4racing@googlemail.com,
Subject: Re: [Fot] Brake caliper sealing rings
From: n197tr4@cs.com
Date: Mon, 18 Oct 2010 20:45:38 -0400
 Chris,

based on our history and the history of others, it seems like  there may be a
larger market than the racing community.

count us in for a set of seals. we HAVE had a few leakers over the years.

people are getting very tired of sub standard materials.

thanks Chris.

Joe








-----Original Message-----
From: Geoff Byrne <gkbyrne@optushome.com.au>
To: MadMarx <tr4racing@googlemail.com>; fot@autox.team.net
Sent: Mon, Oct 18, 2010 5:53 pm
Subject: Re: [Fot] Brake caliper sealing rings


Max
On my race TR6 I do not run the dust covers as they go to toast first race .
never had a problem with leaks but i always clean pistons with brake clean and
air before pushing back to insert new pads . i have found varying quality in
the seals and am very particular which seals i use.
Can you give more details of the rings eg material and likely cost
Geoff Byrne
TR6 Racer Down Under

----- Original Message ----- From: "MadMarx" <tr4racing@googlemail.com>
To: <fot@autox.team.net>
Sent: Friday, October 15, 2010 6:19 AM
Subject: [Fot] Brake caliper sealing rings

> Hi FOT,
>
> after I got bothered over years by leaking brake seals I started to >
develop
> rings out of special DOT 3;4;5.1 resistant rubber with extended heat
> resistance.
>
> They are made for racing purpose and surprisingly they also do help >
against
> pad pushback.
> I have run the sealing rings the whole season and had no leaks and hard as >
a
> rock brake pedal.
> As the dust cover do get toasted during racing I replaced the dust cover >
by
> a slotted ring to prevent the enter of dirt into the caliper.
>
> These rings are expensive because of the material they are made from.
>
> I didn't order a run of rings as I have to take the minimum of 240 from >
the
> manufacturer to get an acceptable price.
>
> If there is interest on your side I would like to know.
>
>
> Cheers
> Chris
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: >
http://autox.team.net/mailman/options/fot/gkbyrne@optushome.com.au
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>