Pertronix likes 3 ohm.
It doesn't care if you run a 1,5 ohm coil with a 1,5 ohm resistor or just a
3 ohm coil.
Only 3 ohm.
Cheers
Chris
-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von cofrog@q.com
Gesendet: Freitag, 15. April 2011 20:46
An: triumph fot; triumph
Betreff: [Fot] Coil Resistance
I'm confused (again).B What coil resistance do I use with a Pertronix
LU142A
B Ignition?B I have two different cars and two different B setups.B A
street
TR4 which has the 1.5 ohm internal ballasted B coil and a TR4A racer with am
external B ballast and a B 3 ohm coil.B Both are negative ground.B Some
folks on the web say use only a 3 ohm coil (unballasted?) with the
Pertronix.B It appears my coil shot craps on the street car and took out
the
I gnitor.B So I'm double checking what resistance coil is proper.
I want to give kudos to Marvin at Pertronix who replaced the toasted LU142A
eventhough it was out of warranty by a few weeks.B
Thanks,
Dan
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|