To lean throughout the RPM range,go to a smaller main jet. To lean at upper rpm
range go to a larger air corrector jet.
Mike
________________________________
From: Craig Leinicke <craigl@leinickegroup.com>
To: macdonaldp <macdonaldp@rogers.com>; Fot <fot@autox.team.net>
Sent: Fri, April 22, 2011 8:17:48 AM
Subject: Re: [Fot] TR7 Video and Carb Tuning
Hello Paul,
The looks and sounds awesome.
Watching the video got me thinking about my TR7 weber carbs.
Here is the current carb set up that I am running...
Choke tubes -------- 30
Aux. venturis ------- 4.5
Main jets ------------ 125
Emulsion tubes --- F9
Air corr jets --------- 155
Idle jets --------------- 55F8
Pump jets ------------ 45
Pump exh valve ---- 45
My question to the group is... My car tends to run rich (full throttle land
speed racing) and rich is better than lean.
To lean the mixture which pieces should I change and which direction should
I go... And how far?
Thanks in advance for feedback... I'm racing mid-may at Maxton.
Craig
Flashback Racing
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|