fot
[Top] [All Lists]

Re: [Fot] CR

To: <trmarty@hotmail.com>, fot <fot@autox.team.net>
Subject: Re: [Fot] CR
From: Kas Kastner <kaskas@cox.net>
Date: Wed, 20 Jul 2011 17:54:14 +0000
I ran 13.2 for several years with just 100 pump octane gas.  Just be sure to
watch the plugs for detonation. the pistons were factory stock GT-6 which gave
a .040" oversize on the Spitfire.

Never be beaten by equipment
 > From: trmarty@hotmail.com
> To: fot@autox.team.net
> Date: Wed, 20 Jul 2011 11:14:11 -0400
> Subject: [Fot] CR
>
> What is the collective wisdom of the FOT masses as to how high of a CR can
be
> run on cast pistons? This would be Spitfire FWIW.  I am at 10.8:1,
> intentionally kept it low because of the cast pistons.  I have had a
> discussion with an engine builder telling me I can go much higher.  I am
> contemplating bumping up to 12:1.  Before I blow something up I thought I
> would toss it out for discussion. What say ye?
>
> Thanks,
> Marty (one race in and I already want to go faster) :)
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/kaskas@cox.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>