fot
[Top] [All Lists]

Re: [Fot] Carrillo TR3-4 rods torquing

To: "'Alexandre Camoletti'" <ac@camoletti.ch>, <fot@autox.team.net>
Subject: Re: [Fot] Carrillo TR3-4 rods torquing
From: "Spitfire Racing" <Spitfire_Racing@twcny.rr.com>
Date: Mon, 15 Aug 2011 17:31:19 -0400
Typically Carillo rods have the bolts torque based on stretch. At least in
Spitfires that's the way it is. Had to buy another gadget but all went well
after a little sweat and nerves. I suggest you contact Carillo, their tech
guys are real helpful and there's probably no better resource for your
question. I bought the stretch gauge at Summit Racing. I can send a picture
if you need and probably their part number.

Russ Moore
Spitfire #49

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Alexandre Camoletti
Sent: Monday, August 15, 2011 5:04 PM
To: fot@autox.team.net
Subject: [Fot] Carrillo TR3-4 rods torquing

Amici ! Currently building a TR3/4 engine with Carrillo rods. 

The set came with the stock Carrillo bolts (called by them WMC/H11) and the
tech sheet says they must be torqued max 40lbs.

While the stock rods and bolts usually are torqued at 60 lbs.

So should I torque the Carrillos at 40 or 60 lbs then ?

Amici, thank you for your very valuable input (as always)!

Cheers

Alex
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/spitfire_racing@twcny.rr.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>