fot
[Top] [All Lists]

Re: [Fot] Oversize split seal for TR4 engine

To: <rkramer3@austin.rr.com>, <fot@autox.team.net>
Subject: Re: [Fot] Oversize split seal for TR4 engine
From: "Greg Solow" <gregmogdoc@surfnetusa.com>
Date: Tue, 31 Jan 2012 10:40:36 -0800
A good crank shop can weld up the seal surface, stress relieve the crank and 
then regrind it to the correct size. Probably in the 175 to 250 dollar 
range. Maybe the shop that miss-ground the crank should pay for repairing 
them.
                                                                             
                            Greg Solow 
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>