fot
[Top] [All Lists]

Re: [Fot] TR4 crank

To: fot@autox.team.net
Subject: Re: [Fot] TR4 crank
From: tr4racing@googlemail.com
Date: Thu, 3 May 2012 07:05:56 +0000
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20120113; h=x-rim-org-msg-ref-id:message-id:reply-to:x-priority:sensitivity :importance:subject:to:from:date:content-type:mime-version; bh=IEnYTnACyR93YADc5ipp2woJySUz9lOwyNt16FyvAZY=; b=ZLFLbY1aHU+kzaKsyitSvnLR97r1YtT+/tNx4yAFVyQXkRYpjcNFD8TJm7o7GE4YGI Jb8EMKrN8aA/1AwWEVj6d6vnwsCOSA1rfA6cb5QKCr/WEGvNzBYMVtGXG4SgKzO1Rw++ T9yg0s2/JGMnXdSHoNHOLZeDAlkzogq6ntQulRJQUrkDbiL1RgYKEH/Vh8x/nzwhR3ar aMuee5iQXZ3Bi8kjssIVUB104zWoIg1y/l9OCfxp/dXh5C/VeO7SQ/Dw6qrs7KkhScxt f7RnRFZ4IdKTTf13zwUcPsMT5+TLF4TOqfB8Fh50xk5YllXEptBEXLYLeNf+DRzhiCk6 sODQ==
List-archive: <http://autox.team.net/pipermail/fot>
List-help: <mailto:fot-request@autox.team.net?subject=help>
List-id: Friends of Triumph <fot.autox.team.net>
List-post: <mailto:fot@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/fot>, <mailto:fot-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/fot>, <mailto:fot-request@autox.team.net?subject=unsubscribe>
Sensitivity: Normal
Hi,

I run a stock crank too. I use revs up to 6400 (rev limiter) but in most cases 
I shift around 6200.
I got benefit of a light aluminium pulley on front and a 6 kg light flywheel / 
clutch unit. I found very tiny cracks at main 2 and 4 but we managed to grind 
them away. The crank is in my current race engine.

I would say a stock crank is a good unit when to keep eyes on cracks and stay 
below 6800.

Cheers Chris 
Gesendet mit BlackBerry von Vodafone
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>