fot
[Top] [All Lists]

Re: [Fot] TR-4 vertical link and trunnion

To: "Charly Mitchel" <charly@mitchelplumbing.com>, "MadMarx" <tr4racing@googlemail.com>, "'Tony Drews'" <tony@tonydrews.com>, <fot@autox.team.net>
Subject: Re: [Fot] TR-4 vertical link and trunnion
From: "Charly Mitchel" <charly@mitchelplumbing.com>
Date: Mon, 20 Aug 2012 08:15:43 -0700
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
References: <20120819210547.336A82D027A@autox.team.net><003f01cd7ea5$eed78de0$cc86a9a0$@com><50324848.a1e2440a.2716.fffffe8fSMTPIN_ADDED@mx.google.com><001a01cd7ee2$de96dcf0$9bc496d0$@com><50325048.49be440a.78ca.71ffSMTPIN_ADDED@mx.google.com><001b01cd7ee4$b61e1340$225a39c0$@com> <240DD26FDB8F4C598FCB3194C49E08F9@Charly>
One more thing, the Jaguar XJ6 ball joints are the same except they are 
narrower, which allows you to shim them for more or less castor.
Charly Mitchel
From: "Charly Mitchel" <charly@mitchelplumbing.com>
To: "MadMarx" <tr4racing@googlemail.com>; "'Tony Drews'" 
<tony@tonydrews.com>; <fot@autox.team.net>
Sent: Monday, August 20, 2012 8:06 AM
Subject: Re: [Fot] TR-4 vertical link and trunnion


> Depends on what you have now.  In box are later TR4 upper a-arms.
>
>
>
>
> TR2-4 Front Suspension
>
>
> Charly Mitchel
> ----- Original Message ----- 
> From: "MadMarx" <tr4racing@googlemail.com>
> To: "'Tony Drews'" <tony@tonydrews.com>; <fot@autox.team.net>
> Sent: Monday, August 20, 2012 8:01 AM
> Subject: Re: [Fot] TR-4 vertical link and trunnion
>
>
>> Everything is the same.
>> You have to ream out the A-arm bushings to fit these sleeves that come
>> with
>> the installation set.
>> If you use the stock A-arms you also need a longer screw for mounting the
>> trunnion as the TR6 screw is too short.
>> Good is that you can take stronger material for this bolt.
>>
>> I send photos.
>>
>> Cheers
>> Chris
>>
>>
>> -----Urspr|ngliche Nachricht-----
>> Von: Tony Drews [mailto:tony@tonydrews.com]
>> Gesendet: Montag, 20. August 2012 16:57
>> An: MadMarx; fot@autox.team.net
>> Betreff: Re: AW: AW: [Fot] TR-4 vertical link and trunnion
>>
>> That sounds like a good upgrade.  Is the upper ball joint the same?  Are
>> there other changes besides using spacers between the Trunnion and the
>> stock
>> lower A-Arms?  Being able to remove the Trunnion without taking the 
>> A-Arms
>> loose from the spring pan would be a good thing I've discovered.
>>
>> If you could send me a few pictures, I'd appreciate it.  I know they 
>> won't
>> make it through the list, but I will get them if the message is addressed
>> directly to me.
>>
>> Tony
>>
>> At 09:48 AM 8/20/2012, MadMarx wrote:
>>>Yes, that was my reason for a change AND you can take the front
>>>suspension apart without taking the spring out....big advantage!
>>>
>>>Cheers
>>>Chris
>>>
>>>-----Urspr|ngliche Nachricht-----
>>>Von: Tony Drews [mailto:tony@tonydrews.com]
>>>Gesendet: Montag, 20. August 2012 16:23
>>>An: MadMarx; fot@autox.team.net
>>>Betreff: Re: AW: [Fot] TR-4 vertical link and trunnion
>>>
>>>Does the later TR-4a / TR-6 vertical link have a larger diameter
>>>section that screws into the Trunnion?
>>>
>>>Tony
>>>
>>>At 02:32 AM 8/20/2012, MadMarx wrote:
>>> >Tony,
>>> >
>>> >you better move on the later trunnion and link versions as they are
>>> >more rugged than the older TR3/4 ones.
>>> >I have installed a TR6 front suspension. There have to be some parts
>>> >to replaced to do that.
>>> >
>>> >I used the TR6 trunnion but with TR4 wishbones.
>>> >With this you need some spacers next to the trunnion to make it fit.
>>> >I can send photos if you like.
>>> >
>>> >Cheers
>>> >Chris
>>> >
>>> >-----Urspr|ngliche Nachricht-----
>>> >Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net]
>>> >Im Auftrag von Tony Drews
>>> >Gesendet: Sonntag, 19. August 2012 23:07
>>> >An: fot@autox.team.net
>>> >Betreff: [Fot] TR-4 vertical link and trunnion
>>> >
>>> >Are the new Vertical Links and Trunnions from Moss any good?  This is
>>> >for a TR-4.  If not, anyone got a decent set of original ones they'd
>>> >be willing to part with?
>>> >
>>> >I broke a right front vertical link where it attaches to the lower
>>> >trunnion at Grattan this weekend.  That's kinda thrilling when it
>> happens.
>>> >
>>> >Thanks in advance.
>>> >
>>> >Tony Drews
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
>> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
>
> [demime 1.01d removed an attachment of type image/gif which had a name of 
> TRI-022.gif]
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>