I've drilled them out before with good results.
I also drilled my spare calipers so everything is the same size; less spares
to carry.
Good luck, Bill
----- Original Message -----
From: "Greg And Alison Blake" <ablake2@austin.rr.com>
To: "FoT Triumph" <fot@autox.team.net>
Sent: Monday, July 22, 2013 10:13 PM
Subject: [Fot] Brake pads
>I just got a set of pads for my calipers and they have holes for the
>smaller
> pins and I have the calipers with the larger retaining pins. What to do?
> Can
> I drill the pad pin holes safely or do I need to pay for shipping again?
>
> Thanks,
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|