fot
[Top] [All Lists]

Re: [Fot] difference early and late TR6 Cylinder head

To: Charly Mitchel <charly@mitchelplumbing.com>, Brian Dennis <britracer89@yahoo.com>, fot <fot@autox.team.net>
Subject: Re: [Fot] difference early and late TR6 Cylinder head
From: Henry Morrison <dos_gusanos@msn.com>
Date: Mon, 6 Oct 2014 14:22:05 -0600
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <BLU173-W219AA7590795A8FE24854690A50@phx.gbl> <5B15BC606DA04D07839D7EF26E490078@Charly> <1412625340.69954.YahooMailNeo@web121403.mail.ne1.yahoo.com>, <E8C4D1FB773F42E6A4E822CEC1A5CF18@Charly> FILETIME=[3266A3E0:01CFE1A3]
Right, the movement was in the vertical plane, the head I have is about 1"
center of intake to center of exhaust, both manifolds will bolt up but the
ports are off a little bit.

Any body know what the offset on the early or late head is?

Cheers, Henry

From: charly@mitchelplumbing.com
To: britracer89@yahoo.com; dos_gusanos@msn.com; fot@autox.team.net
Subject: Re: [Fot] difference early and late TR6 Cylinder head
Date: Mon, 6 Oct 2014 12:58:36 -0700








TR6 changed about 1972, I believe.
Charly Mitchel
----- Original Message ----- 

  From: 
  Brian 
  Dennis 
  To: Charly
Mitchel ; Henry Morrison 
  ; fot 
  Sent: Monday, October 06, 2014 12:55
PM
  Subject: Re: [Fot] difference early and 
  late TR6 Cylinder head

  
  The GT6 MK 2 and 3 have the wider ports as does the later TR6 
  heads.
The TR250 (and I think the very early TR6) has the narrow port head 
  (intake
ports closer together).
  Brian
  Foster, 
  RI

  
    
    
    
    
    From: 
    Charly Mitchel
<charly@mitchelplumbing.com>
To: Henry Morrison <dos_gusanos@msn.com>; fot <fot@autox.team.net>
Sent: Monday, October 6, 2014 3:43 
    PM
Subject: Re: [Fot] 
    difference early and late TR6 Cylinder head

The earlier heads are closer together, I 
    believe the same as GT6 Heads.
Charly Mitchel
----- Original Message 
    -----
From: "Henry Morrison" <dos_gusanos@msn.com>
To: 
    "fot" <fot@autox.team.net>
Sent: 
    Monday, October 06, 2014 12:41 PM
Subject: [Fot] difference early and 
    late TR6 Cylinder head


> Good Day,  Could someone refresh 
    me on the centers of the ports on the
> early
> style cylinder 
    head?
>
> Thanks in advance,
>
> Henry Morrison 
    Albuquerque, NM
> 
    _______________________________________________
> fot@autox.team.net
>
> 
    http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/britracer89@yahoo.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>