fot
[Top] [All Lists]

Re: [Fot] TR6 crank journal dimensions

To: Charly Mitchel <charly@mitchelplumbing.com>
Subject: Re: [Fot] TR6 crank journal dimensions
From: Scott Janzen <sjanzen@me.com>
Date: Mon, 15 Dec 2014 11:21:46 -0500
Cc: FOT <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <BLU168-W56F859F5948ECEA5492F25BA6F0@phx.gbl> <40EB32EBB5FE4ADEB01840AF6EC8E82F@Charly>
Charly's numbers are correct - I'm in the middle of a GT6 build - same
dimensions, and that's where they should be before grinding undersize.

On Dec 15, 2014, at 11:09 AM, Charly Mitchel wrote:

According to my manual,
Main journal diameter 2.311-2.3115"
Crankpin diameter 1.875-1.8755"
Charly Mitchel
TR6 #44
----- Original Message ----- From: "marty" <trmarty@hotmail.com>
To: "FOT" <fot@autox.team.net>
Sent: Monday, December 15, 2014 7:56 AM
Subject: [Fot] TR6 crank journal dimensions


> Anybody have the dimensions handy for the TR6 crankshaft main and rod
> journals? I don't seem have them at work. I found some on the internet but
> think they left off a number.
>
>
>
> Thanks,
>
>
>
> Marty
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>