fot
[Top] [All Lists]

[Fot] Fw: [TR] 10 spline diameters?

To: "triumphs@autox.team.net" <triumphs@autox.team.net>, "fot@autox.team.net" <fot@autox.team.net>
Subject: [Fot] Fw: [TR] 10 spline diameters?
From: Jack Wheeler <jwheeler1947@yahoo.com>
Date: Sat, 20 Dec 2014 13:48:45 +0000 (UTC)
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s2048; d=yahoo.com; b=H1E50TT+7HIMxCK1LGwbftojLJSuybs6pGdAz/YSrO8hnHvaVS4bP4HyGmUOGB5nuIKy8SGxz6Oodz0zRBqe0H6H50THlLS6gEQcue5k6Ssaqwc363w3cJKmIFW8ye3d6CoG7fc8otGg96ulH9JqSApLsJN6/siLhI3rQ8NMTxdNcqylR4qbaRtptXXzVhipsuxGzR+1gEeyNACpXWodwkC/zbeL9rTvpiNzZoLTPEvMpfJOWio1BSvqIY3biouXJq53P9n8+vzNbMIzawwFkSpqWntdaaCuNSc/uzvtlZ8JED3xATpyYiGHxFHOk5ogwjcfGLW8Y4U16iqjPBQdRw==;
References: <e479kjd6ddilmqvmt8bq2w2c.1419042949009@email.android.com>
The stock input shaft diameter and splines on the TR-6 and GT-6 transmissions
are different.B  When SCCA approved the Dolomite Sprint close ratio gearbox
(about 1980) for use in the TR-4, the Dolomite gearbox had the same input
shaft as the GT-6.B  So, until I moved up to a Tilton clutch, I simply used a
GT-6 clutch plate with the TR-6 pressure plate.B  I hope this helps.
Jack Wheeler
    ----- Forwarded Message -----
  From: Ted Schumacher <tedtsimx@bright.net>
 To: Bud <levilevi@comcast.net>
Cc: Triumph List <triumphs@autox.team.net>; FOT <fot@autox.team.net>
 Sent: Friday, December 19, 2014 9:35 PM
 Subject: Re: [Fot] [TR] 10 spline diameters?

Bud, GT6 is 1" 10 spline. We did the TR6 trans conversion 40 years ago. We can
supply whatever you need - clutch, etc.B  Please let me know if we can help.
Ted

Sent from my Verizon Wireless 4G LTE DROID

Bud <levilevi@comcast.net> wrote:

>Listerati,
>
>What is the diameter of a 10 spline input shaft on a GT6 transmission? Is it
>the exact same size as a 10 spline TR6 transmission?
>
>I'm thinking of mating a TR6 tranny to a Spitfire that already has a GT6
>tranny. Anyone done this?
>
>I heard that Kas adapted a TR6 to a Spit but haven't seen in any of his
books
>what is involved. Hope he see's this post and can provided the details. My
>hope is that I'm half way there with a GT6 tranny already in place and can
use
>the existing clutch and flywheel.
>
>Also, any recommendations on companies that reline clutches? The existing
>clutch is apparently a custom hybrid for a GT6 tran mated to a Spit.
>
>Thanks
>Bud
>
>** triumphs@autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/tedtsimx@bright.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>