| To: | "Dean Tetterton" <tr3a58@verizon.net>, "FOT List" <fot@autox.team.net> |
|---|---|
| Subject: | Re: [Fot] high torque starters |
| From: | "Bill Tobin" <william.tobin31@verizon.net> |
| Date: | Wed, 07 Sep 2016 10:06:46 -0400 |
| Cc: | TR3/6 List <triumphs@autox.team.net> |
| Delivered-to: | mharc@autox.team.net |
| Delivered-to: | fot@autox.team.net |
| References: | <A1CA53BB-43B3-4332-945F-DC9E210D0AB9@verizon.net> |
Good job. Those hex head bolts are usually pretty hard to drill. It ain't overkill if it keeps you out of the crap! Cheers, Bill ----- Original Message ----- From: "Dean Tetterton" <tr3a58@verizon.net> To: "FOT List" <fot@autox.team.net> Cc: "TR3/6 List" <triumphs@autox.team.net> Sent: Wednesday, September 07, 2016 8:39 AM Subject: Re: [Fot] high torque starters I guess it is a little overkill, but I got some M6-1 X 50mm socket head cap screws and drilled them for a safety wire. Wired them up and feel they will resist the loosening due to vibration. _______________________________________________ fot@autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Fot] high torque starters, Dean Tetterton |
|---|---|
| Next by Date: | [Fot] Amelia Island Triumphs. Bill Warner., Joe Alexander |
| Previous by Thread: | Re: [Fot] high torque starters, Dean Tetterton |
| Next by Thread: | [Fot] Gillanders sells BFE, Dave Hogye |
| Indexes: | [Date] [Thread] [Top] [All Lists] |