fot
[Top] [All Lists]

[Fot] Nomination and Second

To: "Jim Gray" <toodamnfunky@comcast.net>,"'fot'" <fot@autox.team.net>
Subject: [Fot] Nomination and Second
From: Tony Drews <tony@tonydrews.com>
Date: Mon, 14 Nov 2016 13:11:51 -0600
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <1744089066.18632483.1478803479174.JavaMail.zimbra@comcast.net> <146748089.18638199.1478803934971.JavaMail.zimbra@comcast.net> <20161112221742.EBF45A027A@relay.mailchannels.net> <001401d23e0f$55f7cb20$01e76160$@comcast.net> <20161114183758.67CD9100288@relay.mailchannels.net>
Thought it might help if I changed the subject line.

Mark, can you add bfeparts@aol.com to the list?

Thanks, Tony

At 12:37 PM 11/14/2016, Tony Drews wrote:
>Just ordered some parts from Brian at BFE, he indicated that he 
>would like to join this list.  I asked him about e-mail address and this one:
>bfeparts@aol.com
>is the one he'd like to use.
>
>I'll gladly second the nomination.
>
>Mark, can you add Brian Howlett?
>
>Regards, Tony Drews
>
>At 06:37 PM 11/13/2016, Jim Gray wrote:
>>Brian Howlett at BFE confirmed his Comp isky springs work at .549. On that
>>note Brian is in business as BFE and  fully operational. He's raced a TR4
>>powered Morgan for 45+ years
>>And really knows these motors.
>>Is Brian a member ?? If not I'd like to nominate him.
>>Jim G.
>>
>>-----Original Message-----
>>From: Tony Drews [mailto:tony@tonydrews.com]
>>Sent: Saturday, November 12, 2016 3:18 PM
>>To: toodamnfunky@comcast.net; fot <fot@autox.team.net>
>>Subject: Re: [Fot] TR4 valve springs for .549 lift ?
>>
>>That seems about what I'm running for lift.  I'm running springs from BFE
>>and they don't bind.  They seem close to the TR-4 springs sold by Crower - I
>>ended up with Crower titanium retainers when BFE went offline (it's back
>>under new ownership).  Isky also has a spring set for TR-4, not sure if
>>those support that lift but I'm guessing they do.
>>
>>www.BritishFrameandEngine.com / BFEparts@aol.com
>>
>>Regards, Tony
>>
>>At 12:52 PM 11/10/2016, toodamnfunky@comcast.net wrote:
>> >FoT,
>> >I'm changing cam spec this year and the new cam will lift at the valve
>> >to .549.
>> >Can anyone suggest a source for valve springs that will work with .549 ?
>> >_______________________________________________
>> >fot@autox.team.net
>> >
>> >http://www.fot-racing.com
>> >
>> >Donate: http://www.team.net/donate.html
>> >Archive: http://www.team.net/archive
>> >Forums: http://www.team.net/forums
>> >Unsubscribe/Manage:
>> >http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>
>
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>


_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>
  • [Fot] Nomination and Second, Tony Drews <=