Bud,
When I had easy access to a plotter and cad, I just drew a circle and graduated
with ticks at every degree and bold lines at 5 degree increments. Once plotted,
I laminated the wheel. I've been using this "degree wheel" for 9 years now and
it works great. Point of the story is you can probably rig one up with readily
available materials.
Greg
Sent from my iPhone
> On Jan 23, 2017, at 11:51 AM, Bud Rolofson via Fot <fot at autox.team.net>
> wrote:
>
> List,
>
> What's rod and main journal clearances should be used on a 1300 race engine
> with a stock crank?
>
> Also any good recommendations on a degree wheel for setting up my cam?
>
> I got a ton of good advice on how to figure out my cam and the timing and
> really appreciate all the help. Now to put it into action.
>
> Thanks
> Bud
>
> Sent from my Commodore 64
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gblake58tr3 at
> icloud.com
>
>
|