fot
[Top] [All Lists]

[Fot] TR3 hardtop drip rails

Subject: [Fot] TR3 hardtop drip rails
From: joealexandervintage at gmail.com (Joe Alexander)
Date: Fri, 3 Feb 2017 10:00:19 -0600
References: <DD97653E-11C0-4A1D-9729-EFAC4EE65BB5@gmail.com> <1045943170.135002089.1485753982788.JavaMail.zimbra@comcast.net> <38968bf8-3e60-c3e2-a70a-5cc0f15a3504@gmail.com> <1300260527.390881.1486130829200@mail.yahoo.com>
Mine are aluminum and they appear anodized.



Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Feb 3, 2017, at 8:07 AM, Jack Wheeler via Fot <fot at autox.team.net> 
> wrote:
> 
> I have just finished restoring a hard top which I have had for over 30 years. 
>  It came with a couple of 'parts cars' that I bought in 1985.  The top was on 
> a TR-3B (1962) car which was crashed in the front end (major damage, but the 
> hard top was untouched).  I don't know when the accident occurred, but the 
> parts car appeared to have been sitting for a long time.  What I am trying to 
> say is that this hard top had spent most of it's life stored in a garage, and 
> was very complete and original.
> 
> The drip rails were aluminum, and I did not notice any plating, anodizing, 
> etc.  They were probably polished before assembly onto the top.  Remember, 
> mine came off a car that was built in 1962 and, as we all know, the British 
> were prone to making a lot of changes as they went.  So what they used in 
> 1962 may not have been what they used in 1955.
> 
> I too, can send pictures if that would help, but it sounds like you may have 
> what you need.  Let me know.
> 
> Jack Wheeler
> 
> 
> From: TeriAnn J. Wakeman via Fot <fot at autox.team.net>
> To: fot at autox.team.net 
> Sent: Thursday, February 2, 2017 2:55 PM
> Subject: Re: [Fot] TR3 hardtop drip rails
> 
>> On 1/29/17 10:26 PM, davehogye via Fot wrote:
>> Lorne,
>> I doubt that you will find the drip rail from Triumph parts suppliers.  Moss 
>> says NA.  It is a polished, perhaps plated or anodized, aluminum piece that 
>> can probably be replicated from a strip of aluminum with a short rolled 
>> edge.  I have a top with the drip rail in tack if you'd like a photo or two.
> 
> I thought they were stainless steel. Mine appears to be. I have never seen 
> them listed for sale.
> 
> TeriAnn
> -- 
> Book - The Essential Guide to Overland Travel in the United States and Canada 
> 2 years to write and 38 years of travel and camping to learn what to write
> 
> The world beckons and life waits for no one
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947 at 
> yahoo.com
> 
> 
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/joe at 
> the-vintage-racer.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20170203/0374ac44/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 1976013 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/fot/attachments/20170203/0374ac44/attachment-0001.jpe>

<Prev in Thread] Current Thread [Next in Thread>