The only bad thing about replacing is that you lose the original VIN number
stamped into the side of the right side plate.
It might be difficult to spot, but after removing the paint it was visible on
my car.
Niels
Fra: Healeys [mailto:healeys-bounces at autox.team.net] P? vegne af rft2 at
aol.com
Sendt: 7. februar 2017 23:15
Til: steveg at abrazosdata.com; healeys at autox.team.net
Emne: Re: [Healeys] BJ8 Shock Problems
Hi Steve,
This is an interesting solution. Just called Tom and looked at the link you
sent me, ordered a couple of plates and will try this method. Looks like it
should work, I'll let you know.
Thank you for this idea.
Mal Hickok
BJ7 & BJ8
-----Original Message-----
From: Steve B. Gerow <steveg at abrazosdata.com>
To: healeys <healeys at autox.team.net>
Sent: Tue, Feb 7, 2017 2:57 pm
Subject: Re: [Healeys] BJ8 Shock Problems
Tom's Import Toys sells handy replacement plates for $99.50 the pair:
http://tomsimport.com/new/parts/parts.asp?sect=30
<http://tomsimport.com/new/parts/parts.asp?sect=30&new=1> &new=1
These should be stronger than the Moss captive nuts. You open up the end of the
shock tower, knock out the captive nuts and slide the plate in.
--
Steve Gerow
Altadena, CA
BN6
Maker of Most Complete Big Healey Rear Disc Kit
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170208/af07a134/attachment.html>
|