fot
[Top] [All Lists]

Re: [Fot] Early Block

To: Joe Alexander <n197tr4@cs.com>
Subject: Re: [Fot] Early Block
From: Brad Eells via Fot <fot@autox.team.net>
Date: Fri, 30 Nov 2018 13:37:25 -0800
Cc: fot@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <1106BFD9-5842-439B-91DF-B202F0671AA7@cs.com>
Joe, 

What is the engine number on the block. My TR3 and 4 blocks use bolts to retain 
the cam bearings.

Brad Eells
Sent from my iPhone

> On Nov 30, 2018, at 11:26 AM, Joe Alexander via Fot <fot@autox.team.net> 
> wrote:
> 
> Kas and All.
> 
> Sean was stripping a block and noticed that there were no Cam Bearing 
> Retainer Hardware. And the center web bridged the width of the block and was 
> machined.
>> 
>> TS1362E
> 
> Clearly, running design changes for a reason. Any insights on this?
> 
> <image1.jpeg>
> 
> 
> <image2.jpeg>
> 
>> 
>> Joe Alexander
>> 4505 Donald Dr
>> Cedar Falls, IA 50613
>> The-vintage-racer.com
>> Gasketinnovations.com
>> Cell:  319.464.4711
>> 
> _______________________________________________
> fot@autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/tr4abrad@gmail.com
> 
> 
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/pipermail/fot



<Prev in Thread] Current Thread [Next in Thread>