fot
[Top] [All Lists]

Re: [Fot] TR6 door trim

To: "Scott Janzen" <sjanzen@me.com>, "Terry Sopher via Fot" <fot@autox.team.net>
Subject: Re: [Fot] TR6 door trim
From: Charly via Fot <fot@autox.team.net>
Date: Mon, 3 Jan 2022 20:21:02 -0600
Cc: 'Friends of Triumph' Triumph <FOT@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
So what I did on my TR6 racecar is installed a 
https://mossmotors.com/handle-door-pull-chrome?assoc=41364 , the holes are in 
the door, just need to install a couple of 
https://mossmotors.com/spire-nut-handle-screw?assoc=41366 and use 
https://mossmotors.com/screw-handle-to-door?assoc=41365

I know its non-original, but makes sense for early TR6's

Charly Mitchel
TR6 #44

On Mon 03/01/22  5:24 PM , Terry Sopher via Fot fot@autox.team.net sent:
> Scott - TRF has the correct door top vinyl padded covers and the
> required clipsâ?¦and tool to seat the clips.
> On Jan 3, 2022, at 17:24, Scott Janzen via Fot  wrote:
> 
>  ok, so itâ??s not a race car question, but Iâ?? trying to finish
> up work on my 1970 street tr6 so that I can get to the race car. I
> stripped the doors down to have them repainted and am now putting them
> back together.At the top of the doors, on the inside between the
> window seal and the door panel, there was foam-backed black vinyl
> glued on and with lower edge tucked behind the door panel and upper
> edge behind the window seal.Itâ??s in bad shape and I need to replace
> it.  I may just end up getting some vinyl and foam but Iâ??m trying to
> figure out whatâ??s correct. 
> Moss shows a piece for the earlier cars with a molded-in handle.  Mine
> didnâ??t have that.
> door-pull-left-foam-pad-reproduction-replaces-855-015 [1]The later
> cars show door top capping - looks more like what I had, but looks
> like itâ??s a rigid piece.  door-top-capping-right [2] 
> Whatâ??s correct?  At the moment, I just have nicely painted body
> color sheet metal between the door panel and the window seal, looks
> kind of nice but out of place with no other exposed metal in the car.
> Scott
> 
> _______________________________________________
> fot@autox.team.net
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive
> http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/terrysopher@gmail.com
> 
> 
> Links:
> ------
> [1]
> https://mossmotors.com/door-pull-left-foam-pad-reproduction-replaces-855-01
> 5[2] https://mossmotors.com/door-top-capping-right
> 
> 

_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>