Special Tool

[Scot Paulson <SPAULSON1@compuserve.com>]

Just finished installing my rebuilt temp/oil gauge back in my BJ8 and
wanted to put in a plug for a home made tool that I used. 
 
Cut a 1/4" slot in a 5/8" deep socket about an inch down. This works like a
champ getting to the probe in the tight space under the thermostat housing.


You can see a photo of the tool on the probe nut at Jim Werner's Healey
site. Directions are self-explanatory although I did not use the clamps.


Scot
'66 BJ8