It's worked for me, although I did not try it on the Healey pilot bearing. No
reason it shouldn't work though.
Mark Fawcett
>
> From: Dave & Marlene <rusd@velocitus.net>
> Date: 2004/05/13 Thu AM 12:36:42 CDT
> To: Scott Willis <ahpowered@hotmail.com>
> CC: healeys@autox.team.net
> Subject: Re: Ignorant
>
> Scott,
>
> You can see what a pilot bearing puller looks like here;
> http://tools.batauto.com/index.php?crn=107&rn=620&action=show_detail
> You can probably rent one at your local tool rental shop & they will
> tell you how to use it. Not really difficult.
>
> Or you can screw around with all sorts of makeshift things that might or
> might not work & spend a couple of days at it. The favorite idea is to
> fill the hole with grease & pound a tight fitting mandrel down the hole.
> It has never worked for me. People have split them with chisels or
> drills to remove & tried most everything else imaginable.
>
> Good luck,
|