I reamed the enlarged holes and used 7/16 bolts. Allen head work best.
Jim
----- Original Message -----
From: "Mark and kathy LaPierre" <mgtrcars@galaxyinternet.net>
To: <healeys@autox.team.net>
Sent: Monday, May 24, 2004 11:54 PM
Subject: Shock Bolt Holes
> I sent my shocks out for a rebuild and was informed that the bolt holes
are
> larger than they should be in one of the rear shocks. Can I install a
> sleeve or bushing in these holes and use the same bolts or what other
ideas
> can be used.
>
> The other option from this rebuilder is to pay a core charge for a
rebuilt
> shock cause the body is considered a non reusable.
>
> Mark,
> 58-MGA
> 60-MGA
> 76-MGB
> 74.5-MGBGT
> 60-BT7
|