Does anyone know of a source for a brake servo non return valve that screws
into the servo?
Or is there an in line one from NAPPA that will fit? The ones I have seen at
the local parts store are inline and the wrong diameter.
Andy
on 6/17/04 10:01 PM, SJNNOCK@aol.com at SJNNOCK@aol.com wrote:
> All power operated brakes are required to have a check valve , the reason ,
> if the engine stops you still have power brakes for a few aplications ... if
> you have a faulty check valve and your engine stops you will need extra brake
> pedal pressure to stop you Healey ... Norman Nock
|