Hi Sid,
I can't imagine putting the screws through the carpet. Of course with
the seal in the joint the tunnel can never completely meet the floor. If
it wasn't in the joint there wouldn't be much seal. Just speculating,
I'll leave it to the "experts".
Dave Russell
BN2
Sid Bronson wrote:
> Listers,
>
> I am installing trans tunnel with new seals front and rear as well as along
> floor board edge. Do the mounting screws go thru the carpet and pad then into
> the floor or directly onto the metal floor. With the new seals the tunnel
> seems to be about a 1/4 " from meeting the metal floor.
> Thanks,
> Sid BJ8 65
|