Hi John,
I can tell you for sure that if there is not a "good" ground on the
panel gage itself, that the gage will read low & erratically.
Also a good ground on the sender is important.
I have had success with the mgaguru site procedures.
Dave Russell
Keith Pennell wrote:
> John,
>
> I have had mixed success with the fix. It is probably just me. The
> home page for the mgaguru is
> http://mgaguru.com/mgtech/electric/electr_1.htm You can go to the
> gauge adjustment site from there.
>
> Keith Pennell
>
>
>
>> Hi Guys and Gals:
>>
>> The fuel gauge in my BJ8 is not reading right. I have a new sender
>> in the tank. I'm sure the problem is in the gauge itself. I know
>> I saw an article
>
>> in the Healey Marque magazine on adjusting the fuel gauge, but I
>> can't locate my copy. If anyone on the list has it and wouldn't
>> mind scanning
>
> it
>
>> and sending it to me, I'd appreciate it.
>>
>> Thanks
>>
>> John O'Brien '61 Bugeye '65 BJ8
|