healeys
[Top] [All Lists]

Re: Break Rotors-Mitsubishi NON Healey

To: "john spaur" <jmsdarch@sbcglobal.net>, <healeys@autox.team.net>
Subject: Re: Break Rotors-Mitsubishi NON Healey
From: "Bob Spidell" <bspidell@comcast.net>
Date: Wed, 20 Jul 2005 21:44:24 -0700
John,


A helpful Lister posted this a few years back:

http://www.stoptech.com/whitepapers/warped_rotors_myth.htm

I had a "warped" rotor for years on my BJ8 (turned it once, but the "warp"
came back).  When I put in new pads (Ferrodo) the "warp" ceased.

YMMV


bs
***************************************************************
Bob Spidell         San Jose, CA        bspidell@comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************

Subject: Break Rotors-Mitsubishi NON Healey


> Hi All,
> 
> I have an Eclipse and the rotors keep warping. 85,000 miles and they need 
> turning for the third time. I rebuilt the calipers once.
> 
> I am looking at higher performance rotors that are either slotted or 
> drilled to reduce heat.
> 
> Will that fix my problem or should I look at something else?
> 
> Any suggestions as to Rotor type (slotted or drilled) and manufactures to 
> look at or avoid?
> 
> Any help would be most appreciated.
> 
> Thanks in Advance.
> 
> John
> '62 healey that never had this type of problem.




<Prev in Thread] Current Thread [Next in Thread>