Ned -
The studs are flat headed T-bolts and are brazed on the floorpan. You can
get the studs from www.cape-international.com and probably
www.britishcarspecialists.com
Cheers,
Alan
'53 BN1 '64 BJ8.
On 1/7/06, Ned Smith <smithn00@kitepilot.net> wrote:
>
> I would like to ask two questions about the studs imbedded in the floor
> pan
> to hold the exhaust system hangers. My BJ8 uses after market hangers
> because
> several of these studs are broken.
>
>
>
> Are the studs welded in or pressed in?
>
> Can they be obtained commercially or should I substitute regular bolts?
>
>
>
> Thanks in advance,
>
> Ned Smith
>
> BJ8
|